Pressure Tanks

PDFPrintE-mail

Pressure Tanks - All pressure tanks have a maximum working pressure of 125 PSIG which is set by Federal safety standards.  Do not remove or alter the safety relief valve which is a required part of the tank assembly.   A typical operating pressure is 20 PSIG for a low viscosity adhesive in a warm mill.  Higher viscosity glues and lower operating temperatures will require higher tank pressures.  Under no circumstances should 125 PSIG be exceeded.

If an application requires a greater pressure that 125 PSIG, then the positive displacement 585/586 pump will be required. 

Login Form